What do folk use? Anything 'designed' for camera rods is overpriced. What is out there as an alternative? Thinking along lines of 15mm copper pipe clips....
I had been thinking about these as well, so you have set me off on a hunt. My local electrical supply had never seen these clips, so bought some of the #251 ¾" off eBay. It's more of a small engine/lawnmower repair item. The #251 clips are ca. $0.59 - $1.00 each (before shipping): https://www.mfgsupply.com/3-251.html https://www.wnysmallengines.net/CONDUIT-CLIP-3-4-CLAMP-ON-251.htm https://www.ombwarehouse.com/dual-7-8-conduit-clip.html
Here's another one: https://www.haldex.com/en/na/abs/anti-lock-braking-system---trailer/installation-components--accessories/sensor-accessoriesblocks--exciter-ring/al920809/
There was a guy on youtube ca. 2013 who showed using a silver metal clip from home electrical installations. I think it was DSLR film Noob or DSLR Video shooter. The clips looked like these: https://www.ebay.com/itm/10-7-8-Conduit-Clip-for-Mini-Bike-Go-Cart-Throttle-Cable/141895465812?hash=item2109a0fb54:g:LOEAAOxyJ59RHDou
https://www.ebay.com/itm/251-CONDUIT-CLIP-3-4-CLAMP-ON-Lot-of-10-/281840574247?hash=item419f01df27
They are electrical conduit clips. Looks like they are ~$1 each when you buy 10. You may find them at a better price elsewhere as
3/4" (251) conduit clamp (clip) -This size is better for a 15mm rod
7/8" (252) conduit clamp (clip)
Maybe with checking at a local electrical supply house, they look like they should cost $0.10 (10 cents) max.
They need to be bent a little for a 15mm rod, you could also dip them in plasti-dip or put heat shrink on them for a rubberized finish.
This plastic one looks interesting but the web page isn't responding:
How about something like this: https://www.ebay.com/itm/Cablesson-Reusable-Releasable-Hook-and-Loop-Nylon-Velcro-Cable-ties-pack-of-10/391631430193
Was thinking that if there would be similar product, but the backside would be rubbery to prevent sliding, and the whole thing would be a little bit elastic so you would get it really tight, it would be optimal product.
EDIT: Actually I found that kind of product but the price is little bit on the salty side: https://www.ebay.com/itm/Elastic-Velcro-Fishing-Rod-Wrap-Tie-Twin-Pack/181627170169
EDIT2: But found cheaper option https://www.ebay.com/itm/2PCS-Fishing-Rod-Pole-Tie-Elastic-Tool-Fastening-Strap-Belt-Wrap-Holder-Outdoor/332480685749
I use BongoTies, love them:
https://www.bhphotovideo.com/c/product/883072-REG/BongoTies_a5_01_Standard_5_Elastic_Cable.html
https://www.djkit.com/gravity-stands/gravity-sacc-35-b-cable-clips.html These would be perfect in 15mm size.
If you don't have a 3d printer, depdending on the size/weight of the cables, you could just use the twisty things that come on loaves of bread.
You can use a 3D printed. https://www.thingiverse.com/thing:497750
Can you show that you have in mind?
It looks like you're new here. If you want to get involved, click one of these buttons!