NANLITE has just released a new accessory compatible with all its Bowens-mount LED fixtures: the NANLITE PJ-BM 19/36. This projection attachment features an interchangeable 19° or 36° front lens to change your beam angle, and it can take Gobos. So let’s take a closer look at it! On the footstep of the Forza 150 launch last week, NANLITE has just released its first projection attachment for Bowens-mount LED lights: the PJ-BM 19/36. NANLITE PJ-BM 19/36 features The NANLITE PJ-BM 19/36 is a projection attachment with a removable/interchangeable front lens. You’ll have the choice to get either the 19° or 36° kit, but you can purchase the other front lens later if you need it. Image credit: NANLITE The PJ-BM 19/36 is mainly made of metal, with a weight of 4.2kg/9.26lbs without a front lens. However, once you add a 19° (3.8kg/8.38lbs) or 36° (3.1kg/6.83lbs) lens, you’ll quickly be close to 7.3kg/16.1lbs minimum. Image credit: NANLITE It’s a lot of weight for a Bowens-mount light modifier; that’s why the PJ-BM 19/36 features its own yoke with a Junior pin and 5/8″ Baby Pin receiver. You’ll mount the NANLITE PJ-BM 19/36 to your light stand and then attach your LED fixture to the light modifier. This design won’t put too much stress on your LED light’s Bowens-mount. Image credit: NANLITE The PJ-BM 19/36 front element features a built-in gel holder. There are also four shapers at the back of the projection attachment to precisely cut your beam of light. Image credit: NANLITE...
Published By: CineD - Wednesday, 10 November, 2021