The daylight shots was done with the same 35mm nikon lens used at night and I used it at f2.0 and f2.8 with good results. Using the prototype at night was more difficult, I believe the focus mechanism will help a lot to do focus at night.

Hi, 35mm focal length taking lens is the wider you can use on GH2 to use the adapter. It is equivalent to 70mm in full frame sensor. At this moment I do not have access to bigger lenses to allow wider focal length. I did tests with Nikon 50mm Ais and it works good too.

As you can see in the video images, I could do good shoots of group of people and buildings with this focal length. Also a great feature of the adapter is it allows to focus close enough to get a face close up without using diopters (as I read in forums this was a challenge with ebay adapters).

In APS-C cameras the wider you can go is something about 42mm focal length.

In small camcorders you just need to zoom in and out to find the best setting.

You do not need to remove the anamorphic adapter to do focus. First you rotate the taking lens focus and find the best you can do. After this you keep the back of the adapter fixed and start to move the front of the adapter to find best focus. So you go back to taking lens and do a fine adjust. (At this moment I am doing this changing shim pieces, but the final body will be adjustable).

If everything works as promised I will get the first machined body tomorrow from the plastic machining service.

Looks awesome on my phone, will check it out on my plasma tonight... very exciting stuff!

Would it be possible to take the lens elements from a 0.7x wide angle adapter and replicate the lens profile on a single axis only(cylindrical) to create a 1.33 anamorphic lens that you could focus through?

Sorry if this belongs somewhere else.

yes, both must be focused. With the focus mechanism ready It will be more simple to do. The first unit is being machined. I will show it when it become ready this weekend.

@apefos, dude that's amazing. Great work! Waiting for a finish product.

@sicovdplas the first final body is on the way. It will be ready on saturday and I can ship it on next monday. Sent PM to you.

OK, no problem.

While I wait to see if the kickstarter will happen, I decided to build the first body and sell the fist unit. As I am in a low money budget at this time I just can build one final body unit using the lenses I already own. So I can sell it and use the money to make other unit. I believe this first unit will be ready in two working days. I will show the footage on vimeo.

Hi @Vitaliy_Kiselev thanks for the advice, but I do not like preorders. I am sure the prototype works properly, but I prefer to sell what is ready to ship, it is safer for me and it is safer for buyer.

So there are two ways to go:

Build the first body and use the lenses from the prototype to sell the first unit uncoated and use the selling money to test the multicoating and build another unit and so on...

The kickstarter project with a small amount goal (250 usd). Backers would do small donations to finish the adapter and test the multicoating options and build one unit to sell. Backers would have priority buying it.

Both ways can be done at same time, I think one way do not exclude the other. I am waiting @Ian_T contact me so we can talk about the project. In previously talking he agreed to open the project as he lives in US, so we just need to discuss the details in project text and upoad the video.

@Meierhans thanks.

@soundgh2 I did not understand anything.

@Vitaliy_Kiselev The prototype is made of small tubes and shim pieces fixed with adhesive tape. The reasons I need the kickstarter is to build the black plastic body with focus mechanism, grind new lenses shaped to it, try three different lens coating to find best option.

An alternative solution would be to build just one body to use with the lenses I already own (lenses used in the prototype). This way I could sell it uncoated. So I could use the money from selling it to experiment with lens coatings and find the best coating design and so build a second unit to sell. This way I could sell one and build another, and so on.

@apefos

Why you really need Kickstarter project and not your own small site with ability to pay?

All the information are ready to open the Kickstarter project.

MP4 1080p Video is edited and ready to upload. Draws and Images are saved in JPG files. Text is written and revised.

Sent PM to @Ian_T to talk about open the kickstarter project.