The Saramonic Vlink2 wireless microphone system is not just another belt-pack plus receiver for wireless miking and recording a talent on camera. With this new arrival, you can also talk back to the talent in question, so the Saramonic Vlink2 system offers 2-way communication! Sometimes you need to communicate with the talent in front of the camera while operating said camera. In this scenario, shouting may not always be the best idea, so you need to a) set up a second wireless TX/RX combo for the talk-back channel or b) use a system like the new Saramonic Vlink2 to combine the primary channel (talent ➞ camera) and the secondary channel (operator ➞ talent) in just one TX/RX setup. The Saramonic Vlink2 kit does just that. It provides an additional 3.5mm input on the TX unit and the RX unit, each for connecting a headset. image credit: Saramonic Saramonic Vlink2 So how does it work? Well, the Saramonic Vlink2 operates like any other transmitter/receiver. It uses the 2.4 GHz band to send audio wirelessly to the receiver, but since each device has an additional 3.5mm TRS/TRRS input, an external headset can be connected. The operator can now talk to the talent, while only the talent’s voice input is recorded (i.e. sent to the output of the receiving unit). How the Saramonic Vlink2 works. Image credit: Saramonic Two kits are available, Kit 1 (one TX, one RX unit) and Kit 2 (two TX, one RX unit). The Receiver module is a two-channel...
Published By: CineD - Monday, 8 August, 2022