PortKeys has just announced a new 5.5-inch field monitor: the PortKeys P6. This monitor features a 1080P display with a decent 500nit brightness and a 4K HDMI input plus a 4K HDMI output. Let’s take a closer look at it! Image credit: PortKeys PortKeys P6 Hardware The PortKeys P6 is a lightweight – 0.28lbs/130grams – entry-level monitor for filmmakers looking for a compact on-camera display. The P6 features an 8bit 5.5″ 1080P display with a 500nit brightness and 1000:1 contrast ratio. This monitor is much more affordable than their PortKeys BM5 that is a workhorse entirely made of aluminum – the P6 is made out of ABS plastic. On the left side, the P6 features two HDMI ports (input/output) that accept 4K signals. Also, in the middle of the HDMI ports, there is a 3.5mm headphone jack output. At the bottom of the monitor, there is a DC 7.4-24V barrel input/output port that you can use to power the monitor or power your camera. Finally, there is a USB-A port for future firmware upgrade, loading your own LUTs, or charge your smartphone (5V output). Image credit: PortKeys On top of the P6, there are four control buttons to quickly access your favorite functions, an On/Off switch, and four buttons to navigate through the menu. To mount the monitor on your camera, there is a 1/4 20″ mounting point at the bottom and one on the right side. Image credit: PortKeys At the rear of the monitor, you will find the...
Published By: CineD - Friday, 13 December, 2019