LensRentals posted their Nikon Z 24-70mm f/2.8 S lens teardown details. Here is their conclusion: As you can probably tell from our struggles doing this disassembly, the Nikon Z lenses are very different than their legacy lenses. They’re also different than what we’ve seen from other manufacturers. That suggests Nikon Z lenses, like Canon R lenses, are a completely new optomechanical design, probably done entirely in-house. The engineering itself is incredible in most ways. The neatly laid out and solidly adhered flexes reflect the careful design. The taping of every possible point that Loctite or anything else could get in the lens does, too. The design is logical and clean; the difficulties in the tear-down were ours. Now that we know our way around, disassembly won’t be bad at all. I will complain about the fact that filter-ring or hood-slot damage means an expensive repair. That was not well thought out; those are common repairs, and they’re going to be pricey on this lens. But the lens is well-engineered, and I see no other weak points to make me think it will be anything less than reliable. The post Nikon Z 24-70mm f/2.8 S lens teardown by LensRentals appeared first on Nikon Rumors. Related posts: Nikon Z6 mirrorless camera teardown Nikon 24-70mm f/2.8E ED VR vs. Tamron SP 24-70mm f/2.8 Di VC USD G2 vs. Sigma 24-70mm f/2.8 DG OS HSM Art lens comparison Nikon Nikkor Z 24-70mm f/2.8 S lens tested at DxOMark (compared with the Nikkor 24-70mm...
Published By: Nikonrumors - Wednesday, 15 January, 2020