iodyne has expanded its Pro Data lineup with new 96TB and 192TB configurations, delivering 80TB and 160TB of usable capacity, respectively, when configured in RAID-6. The new high-capacity models maintain the same portable enclosure and sustained Thunderbolt performance that have made Pro Data a reliable choice for field production, post-production, and data transport workflows. The addition of 96TB and 192TB options addresses the growing storage demands facing production teams working with high-resolution formats like 8K RAW, multi-camera recording, and large-scale VFX projects. These new configurations are specifically designed for teams that need to carry large volumes of data while maintaining the portability and reliability required for field work. Both new models retain the familiar Pro Data dimensions of 15.39×10×1.22 inches / 39.1×25.4×3.1 cm and weight of 7.3 lbs / 3.3kg, making them backpack-ready despite the significant capacity increase. The drive features eight 40 GB/s Thunderbolt 3 ports and continues to deliver sustained speeds up to 5 GB/s, what iodyne calls TruePut for consistent performance in demanding workflows. iodyne Pro Data. Credit: iodyne RAID configurations and usable capacity The 96TB and 192TB Pro Data systems can be configured in RAID-6, which provides fault tolerance by allowing the system to survive two simultaneous SSD failures. In this configuration, the 96TB model delivers 80TB of usable capacity, while the 192TB model provides 160TB. For workflows that prioritize maximum capacity over redundancy, both systems can be configured in RAID-0 to access the full raw capacity. This flexibility enables cinematographers and DITs to strike the...
Published By: CineD - Wednesday, 21 January