Hollyland just released the new Mars 400S PRO Wireless Video System with zero delay over a range of 400 feet (122 m) which also offers a rather new approach to form factor. With HDMI and SDI in- and outputs and multiple power inputs this appears to be a flexible solution for your on-set video monitoring. The Chinese Manufacturer changed up their Wireless Video System compared to their existing 400S (non PRO) solution and added some key improvements to their new offering. What’s new with the Mars 400S PRO? Compared to the Mars 400S the most apparent difference is the new design of the new transmitter and the receiver. Hollyland Mars 400S PRO new design. Source: Hollyland Both devices feature a horizontal design with integrated cold shoe mounts and a large OLED display. The design-language is also very different from the previous system. Hollyland Mars 400S design for comparison. Source: Hollyland Image Transmission and Quality The Mars 400S uses the 5GHz spectrum and has a transmission range of 400 feet (122 meters) with clear line of sight. The lowest possible delay is 0.08 seconds in optimal conditions, according to the manufacturer. Low latency and 400ft range. Source: Hollyland Resolutions up to 1920×1080 60fps can be transmitted with an optimized monitoring data rate which is improved from 8 Mb/s to 12 Mb/s for better image quality. One transmitter can either send a signal to up to 2 receivers or you can also monitor the image with the HollyView App on up to...
Published By: CineD - Thursday, 15 October, 2020