Personal View site logo

User Tools

Site Tools


ptool:ptool-faq-jap

※このページは作成中です。

PToolとはなにか、そしてハックすると何ができるのか?
  • PToolはロシア人ハッカー、Vitaliy Kiselev氏が作成した、Panasonic Lumixカメラ数機種の内部ファームウェアをいじるためのWindowsアプリです。このツールを使うと、ファームウェアの制限を解除し、動画エンコーディングのパラメーターを変更することができるようになります。特に、動画撮影時のビットレート変更は、画質向上に多大な影響を及ぼします。
ハックに関するヘルプ情報はどこにあるか?

もし英語を読めるなら、世界中のアマチュア、セミプロ、プロが集い、日々激論を戦わせている当PERSONAL VIEWフォーラムに目を通すことを強力にお勧めします。

英語の情報は敷居が高いという方は、当Wikiにまとめられている一般的な情報をもとにご自身で研鑚を重ね、あるいはraitankさん主宰ブログ内フォーラム「GH2 カスタムファームのお勉強」にて熟練メンバーの皆さんに質問をお寄せください。

PToolで編集できるカメラのファームウェアについて
PToolはどこで手に入るのか?
PToolの使い方は?
  1. Please see the camera-specific FAQ pages for more information about hacking certain cameras.
  2. Download an original Panasonic firmware image for your camera, and unzip it to get the .bin file. (see the download links, above)
  3. Run PTool
  4. Click “load firmware” and load the original Panasonic firmware .bin file
  5. Make you settings in the Ptool window. If you want to load stored settings, see below.
  6. Click “Save Firmware”. Choose a filename that is the same as the original firmware .bin file, except with a different number. (e.g. GH2__V11.bin instead of GH2__V10.bin) Note that the filename has two underscores.
What is testing? Who are testers?
  • Vitaliy did a tremendous amount of work in reverse engineering the firmware images and figuring out what many of the parameters do. But there's too much for one person to figure out alone. The process of testing different parameter settings and figuring out what they do has been delegated to any willing tester.
PToolの設定を読み込んだり保存したりする方法は?
  • PTool can load or save settings in an .ini file, letter A - J. (seta.ini, setb.ini, etc.)
  • To load an setings in .ini or .zip file, run PTool and click on empty round button, it'll ask you for file location and will import and store them. After this you could load settings just by clicking on this round button.
  • Run PTool and load the original firmware
  • To load settings, click a letter button at the bottom of the PTool window. Loadable settings have a green button.
  • To save settings, shift-click a letter button at the bottom of the PTool window. Enter descriptions, and then click “store settings”.
カスタムファームウェアをカメラに反映させる方法は?
  1. Copy firmware .bin file to root of SD card. Fully charge you battery. Do not even attempt to use AC coupler or 3rd party battery!
  2. Power off your camera if it was on.
  3. Power on camera. After this press (not hold) green play button.
  4. You'll see hourglass and prompt to update.
  5. Press up arrow, and then press Menu/set.
  6. Wait for the update to complete. Do not touch your camera while the update is in progress.
  7. When the update completes, the camera restarts itself.
  8. If anything unexplained happens after flashing, try resetting the camera. (Menu, Setup, Reset) Usually a reset is not necessary.
MacユーザーがPToolを使うためには

Small tips

1. Remember that Testers section settings are for testers. Use simple bitrate settings.
2. How can I make encoder hold better in low detailed scenes? Use Auto Quantizer settings

PToolを使ったGH2ハックの概要と手順

PToolの入手方法、PToolを使ったハックの方法と手順、WindowsアプリであるPToolをMacOS上で使う方法等については、raitank blog内に日本語による解説ページがありますので、そちらをご覧ください。

無事にカスタムファームをインストールして、その高性能を堪能したら・・・

GH2他パナソニック製の数々のカメラをハックしてPToolによりファームウェアをカスタマイズ可能にした張本人、Vitaliy Kiselev氏へ感謝の気持ちを込めてカンパしましょう! 金額は少なくても構いません。クレジットカード番号を知らせる必要のない PayPalも使えますので、無理の無い範囲で何回でもご協力をよろしくお願いします。

donate.jpg

ハックの結果を分析するための便利なツール

「StreamParser」:

PERSONAL VIEWにて Vitaliyさんの右腕的存在である Chris Brandinさんが開発し、無償で公開しているデータ解析ソフトです。このソフトを使うと、カスタムファームの中身… つまり、ややもすると「曖昧で主観的な何か」になりがちな「画質」というものを、誰でも簡単に可視化することができます。ハックの手応えを客観的に見ることができますし、ストックとの比較も容易になるので、ハックが楽しくなること受け合いです。 - https://www.personal-view.com/gh1hack/StreamParser.zip

詳しい使い方はこちらをご覧ください:http://www.personal-view.com/faqs/streamparser-jap

「Elecard StreamEye」:

StreamParser以外で、画質を細かく分析するための便利なツールとしてオススメです。画面上の各マクロブロックのqpがどう分布しているか等、StreamParserよりも細かく分析できます。 - http://www.elecard.com/en/download/products.html

ptool/ptool-faq-jap.txt · Last modified: 2022/04/21 04:11 by vitaliy_kiselev