Tagged with premiere - Personal View Talks

Tutorial - Create a Cinematic Professional Golden Film Look

davidhjlindberg — Fri, 11 Apr 2014 08:56:50 +0000

Hey guys!

Since it's Friday I decided to make a color grading tutorial for you guys on how to create the cinematic golden look as you can find in the beautiful film A Very Long Engagement.

I'm doing this all inside of Adobe Premiere Pro since that's the most common software you guys asks me to do a tutorial on.

Hope you'll like it!

MSI GTX 1660 Ti "Ventus" 6GB OC review

DrDave — Fri, 06 Mar 2020 19:25:07 +0000

MSI GTX 1660 Ti--bought this from Amazon when my previous MSI 780 ti bricked. Would have preferred another brand since the previous one did stop working, after all, but this one was available next day and production time yada yada. Arrived 14 hours later at 2:30 pm. Bit of a struggle for some reason to get the port end into the side slots but it did go in.
Card is, if anything, more compact than the previous 780 ti, and uses less power, with a better overall finish. There's a back plate to cover the fish and chips on the circuit board. Fans are OK noise wise but not the quietest (Zotac, for example, quieter under load).

I was dubious about the memory bandwidth and CUDA cores, but, in fact, no worries, the newer design more than compensates. Playback and export in Premiere only uses 60-70 percent of the card, even with 4K clips with a ton of filters, so this card is fine for most people. You can step up to the 20 series but it is an incremental gain. Normally I buy these cards on eBay because gamers upgrade so often, but I had to plunk down $270 for a new one and overnight shipping to keep working.

Using Neat Video, interestingly, the optimum frame rate uses only the GPU! That frees up the CPU. Getting over 6fps render in Neat video with 4K clips using GPU only. Not great, but slightly better than what I had before. The 6GB ram seems OK for 4K, I doubt it will handle 8k but whatever. Has display ports and HDMI 2.0

MSI terminology for the flavors of these cards is confusing, and Ventus sounds like a coffee term, and you may have to install the USB C driver even if there is no port. There's a "super" version of the 1660 which has a few less CUDA cores that is also a bit cheaper. Knowing nothing, I went for the higher CUDA core model. Overall, a solid card.

WTF CPU

DrDave — Sun, 01 Sep 2019 19:47:14 +0000

So, have had my Intel six core (HT) cheapo system for some time now, using Premiere Pro. I can't say it's zippy, but it works. It chokes a bit on transitions with stacked filters. It's overclocked to "4".
So I figure I need a new system at this point. Plus I have 14 8TB hard drives in the computer, so I guess the only thing to do is build a new one and keep the old one.
I'm looking at all the ratings, reviews, etc. For CPUs and cards.
According to a lot of benchmarks, even a fairly cheap Intel 8 core will perform as well as some of the new 16 or 24 core CPUs. This seems ridiculous.
What do you all think? What's a good CPU Graphic card combo?

Sound mixing, and matching tracks recorded in different ways

Brian_Siano — Thu, 16 Nov 2017 17:46:46 +0000

I'm finalizing a video project, and there's a big issue with our sound recordings.

Here's the background. While shooting, we obviously got camera mike sound for all takes. But we'd rented and used a couple of shotgun mikes with a Tascam recorder for many scenes, and the sound we got from those is marvelous. Obviously, my question is about making the camera mike tracks sound a bit more like the fuller, shotgun-mike tracks. Or vice versa, if that's what's needed.

I'm not much of a sound person, so I'd have to understand the principles involved, and then learn to use the Premiere Pro or Audition tools to accomplish the job. Can anyone point me to some good tutorials that might help?

Exporting audio in PCM and FLAC for YouTube

DrDave — Tue, 03 Oct 2017 20:00:25 +0000

I see YouTube is now recommending PCM and FLAC for the audio part of uploads. I'm wondering what the best way to do this is, in Premiere Pro.
Obviously, it isn't part of the regular x264 or HEVC export process. Anyone have any experience doing this? I think Sorenson allows for it, but I'm not sure it is part of the official specification.

How to setup Dell U2410 wide gamut monitor for color grading in CS6 and Resolve?

inqb8tr — Wed, 24 Apr 2013 04:57:21 +0000

As my main monitor I use Dell U2410 connected via DVI to a hackintosh OSX ML. Since Premiere CS6 is not color managed as far as I know, I usually switch to sRGB profile of the monitor to get normal color saturation. It is a simulation of sRGB color space, but it is somehow "mushy". If I leave it at AdobeRGB preset mode that I use for everything else, colors of the video are over saturated, like any other non managed srgb content on a wide gamut monitor.

I need some advice here, can I somehow adapt my workflow to stay in AdobeRGB profile of the Dell monitor, and to have an accurate representation of colors in my editing and grading software (resolve)?

I don't have an external grading monitor, nor I plan to get one anytime soon. I don't need absolute accuracy here, only some decent reference point.

Method for Closed Captions in Premiere Pro

Brian_Siano — Thu, 01 Jun 2017 10:48:07 +0000

I'm working on a filmed play, and I'd love to add closed captions to the project. Since it's a play, I have a script as a Word file, and it shouldn't be difficult to take that text and convert it to a set of closed captions, right? Well, it's work, so here goes.

First of all, captioning requires that each line be associated with a timecode, which determine when the caption appears and disappears. In the past, this would have to be hand-entered, but the latest release of Premiere Pro allows users to move sliders to adjust the timecodes. So the main hurdle here is getting the captions into Premiere Pro, where we can fine-tune the timing.

Still, the transcript we're importing has to have some time codes in it. So we have to convert the script to a format that does. Here's a method that I use that isn't perfect, but it accomplishes a lot. 1) Paste the script into an Excel spreadsheet, so that each line of dialogue is in a separate row. 2) Insert columns before the dialogue. In one column, insert a number sequence (1,2,3, etc.) This will help you preserve the original order if you resort the list for some reason. You will probably have to break some longer stretches of dialogue into several rows, so these numbers come in handy. 3) Use two columns for your timecode, and use the format "hh:mm:ss". This can only handle timecode as far as hours, minutes and seconds. (Don't worry about frames for now.) 4) Take the duration of your video (say, half an hour) and divide it by the number of lines of dialogue. That gives you an average length of time for an average line of dialogue (say, three seconds). You can fill in the Timecode columns with timecodes that increase by three seconds.

Basically, if you're good with spreadsheets, you can use Excel to reconfigure your captions pretty effectively. You can now use this spreadsheet with a word processor to merge this data into a format that works as a captions file. The easiest to use is the *.srt format, which looks like this:

1 00:00:01,1 --> 00:00:06,1 ACT ONE

2 00:00:07,1 --> 00:00:12,1 JULIANA: They’re not even up yet!

3 00:00:13,1 --> 00:00:17,1 BERTA: That’s just what I said, Miss Juliana. Remember how late the boat got in last night. Yes, and once they got home, the young bride had so much to unpack before she would go to bed.

The format is simple. The first timecode, followed by ",1" to signify frames. The two dashes and an arrow. And then the text of the caption, which ends with a double linefeed.

Premiere Pro's Problems - Open versus Closed Captions. Now, you'd think that you could simply Import this file, apply it to your tineline, and adjust those timecode sliders to time the captions right. But that's not correct.

You see, Premiere Pro cannot import SRT files as Closed Captions. It interprets them solely as Open Captions, and you can't change them afterward. (Converting Closed to Open, and Open to Closed, would be a great feature to request.) So you need to take this SRT file, and convert it again to a format that PP imports as Closed Captions. Such as SCC format, which looks like this:

Scenarist_SCC V1.0

00:00:00;00 942c 942c 9420 9420 94ae 94ae 9476 9476 c143 5420 4fce 4580

00:00:01;03 942f 942f

00:00:06;03 942c 942c 9420 9420 94ae 94ae 9452 9452 4ad5 4c49 c1ce c1ba 94f2 94f2 5468 e579 a7f2 e520 6eef f420 e576 e56e 2075 7020 79e5 f4a1

00:00:07;03 942f 942f

00:00:12;03 942c 942c 9420 9420 94ae 94ae 97d0 97d0 91b9 91b9 c245 5254 c1ba 2054 6861 f4a7 7320 ea75 73f4 20f7 6861 f420 4980 9770 9770 91b9 91b9 7361 e964 2c20 cde9 7373 204a 75ec e961 6e61 ae20 52e5 6de5 6d62 e5f2 10d0 10d0 91b9 91b9 68ef f720 ec61 f4e5 20f4 68e5 2062 ef61 f420 67ef f420 e96e 13d0 13d0 91b9 91b9 ec61 73f4 206e e967 68f4 ae20 d9e5 732c 2061 6e64 20ef 6ee3 e580 1370 1370 91b9 91b9 f468 e579 2067 eff4 2068 ef6d e52c 20f4 68e5 2079 ef75 6e67 94d0 94d0 91b9 91b9 62f2 e964 e520 6861 6420 73ef 206d 75e3 6820 f4ef 2075 6e70 61e3 6b80 9470 9470 91b9 91b9 62e5 e6ef f2e5 2073 68e5 20f7 ef75 ec64 2067 ef20 f4ef 2062 e564 ae80

00:00:16;11 942f 942f

00:00:17;03 942c 942c 9420 9420 94ae 94ae 94d0 94d0 91b9 91b9 91b9 4ad5 4c49 c1ce c1ba 2057 e5ec ec2c 20f4 68e5 6e20 ad20 ece5 f480 9470 9470 91b9 91b9 91b9 f468 e56d 20e5 6eea ef79 20f4 68e5 e9f2 20f2 e573 f4ae

00:00:18;15 942f 942f

00:00:23;03 942c 942c 9420 9420 94ae 94ae 1370 1370 c245 5254 c1ba 2049 2073 f7e5 61f2 20f4 68e5 f2e5 20e9 736e a7f4 94d0 94d0 6120 62e9 f420 efe6 2073 7061 e3e5 20ec e5e6 f4ae 2049 20f4 68e9 6e6b 9470 9470 49a7 ecec 2068 6176 e520 f4ef 2070 75f4 20e9 f420 68e5 f2e5 2c20 cde9 7373 ae80

00:00:25;00 942f 942f

Luckily, there is a website (https://www.rev.com/captionconverter) that enables you to upload an SRT file and convert it to SCC.

At that point, you have to place the captions into your project, and then use the sliders to adjust the timecodes.

Sound mixing board for use with Premiere Pro CS5?

Brian_Siano — Mon, 24 Feb 2014 10:36:11 +0000

I'm working on several projects where I could get a LOT of mileage of having a hardware sound mixer (sliders, etc.) by my keyboard while I'm editing. Are there any sound mixers that are small, cheap, and interface with Adobe Premiere Pro CS5?

All of T. Dashwood's plugins now FREE (FxFactory) - fcpx, mtn, pr, ae

maxr — Wed, 26 Apr 2017 06:49:41 +0000

What the title says, as Tim Dashwood has joint the Apple Stark, all of his stuff (working under the FxFactory) is now released free

His 360VR Toolbox used to sell for over $1,000. If you produce or are thinking of making 360 videos then this is a great pack of plugins.

Here the Editor Essentials

https://fxfactory.com/info/editoressentials/

and a cute SG

Source: http://www.fcp.co/final-cut-pro/articles/1956-tim-dashwood-joins-apple-all-of-his-plugin-products-are-now-free

Effects question: removing a background

Brian_Siano — Tue, 11 Apr 2017 11:07:10 +0000

Let's say I have a shot with an actor in a room. The camera doesn't move, so the background is completely static, and doesn't change from frame to frame beyond the usual grain. I'm figuring that, if I had a frame of just the background, I ought to be able to use it to filter out the background and isolate just the actor, as though it were a greenscreen.

I'm having some trouble doing this in Premiere Pro. Any suggestions?

2016 Best Export Settings for YouTube

matt_gh2 — Wed, 28 Sep 2016 21:13:25 +0000

Thought I had my secret sauce for export settings...but pulled a project from about a year ago, making some tweaks, and re-exported using my previous primo Premiere Pro settings...but image was destoryed. Tons of banding/blotchiness, general low resolution, etc (Even when playing in 1080 on YouTube). I was using H.264, 12 Mbps for Target Bit Rate, and 40 Mbps for Max Bit Rate, High Profile 5.1, and checking lower box for rendering at max quality. 3 minute video was 253 MB. I guess YouTube has changed their ways they compress/encode etc. Last year this export looked great...now it's horrible!

What's everybody using for their export settings these days for YouTube? (and Vimeo for those interested there too)

GH4 External Vlog White Balance Metadata

club_irate — Tue, 30 Aug 2016 02:00:21 +0000

Is there a way to view the precise Kelvin reading of GH4 footage in Premiere Pro CC metadata or any other software? The DP shot in varied White Balances in V log External & i need to be able to get the accurate temperature data of the footage he shot on.

Also, i am using Filmconvert (GH4+VLOG) to grade. The WB parameter (in Film Convert) is an offset rather than a setting in my past experience. Would it then actually wreck my clip if i dialed the Film Convert WB parameter over to 3200K from it's default position on Daylight if the footage was shot on 3200K too?

is gtx980 not supported by Premiere pro CC ?

sergeiicz — Wed, 20 Jul 2016 04:44:46 +0000

Hello, during rendering with gpu-related efects (procamp, lumetri, MB looks,...) GPU is idle 0-20% of load when CPU is running all at 100% load all the time. Is that caused by non-official cuda support for gtx980 in PPCC ? Last PPCC 2015.3, fresh drivers on GPU and MOBO and of course CUDA Playback/render activated I am actually thinking about buying one gtx780ti for cuda work Thank you

Looking for beta testers for After Effects/Premiere Plug-in

Brumbazz — Wed, 16 Mar 2016 17:26:55 +0000

A friend and I have been trying to create a simple little plug-in for After Effects and Premiere. What the plug does is simply stretch a frame to the desired aspect ratio.

The idea behind the plugin is simply that sometimes, it can be advantageous to use the full sensor in 4:3 and then stretch in a 'clever' way afterwards. The included images show an original image in 4:3, stretched 16:9 and stretched 16:9 with a distortion grid overlay and the protected region shown in green. The plugin is quite customizable (stretching, size and position of protected region plus some bells and whistles) but the default settings should work in most cases.

It currently only works under Windows but in both AE and Premiere (6.0 or later), we expect to compile it for Mac eventually.

If you feel like this is a good idea and you would like to help us with testing, send me a short PM. We would like feedback on: bugs, usability, suggested features and settings.

As this is a hobby project no money will be involved :-)

General comments are also welcome

My homage to the 80'ies 3 min up-tempo synth-pop songs

elkanah77 — Sun, 07 Feb 2016 03:59:28 +0000

Tried to capture the essence of the fun, up-tempo and a bit melancholy synth-pop of the 80'ies. The decade I loved so much. I made this with a lot of old gear for the music Rolands, Korgs and Yamaha DX of course. Shot on the Sony A6000 with the kit-lens and the 55mm 1.8. Some shots are with the iPhone 6 and a 4K hack to get some movement going.

Adobe Premiere Elements 14

Vitaliy_Kiselev — Tue, 25 Sep 2012 12:30:03 +0000

See more videos: http://www.youtube.com/user/photoshopelements/videos?view=0

Previews and reviews:

Available at:

4K 8bit 4:2:0 on the Panasonic GH4 converts to 1080p 10bit 4:4:4

Alexauwa — Tue, 30 Jun 2015 03:19:31 +0000

There is an quite old but interesting article by EOSHD about that: http://www.eoshd.com/2014/02/discovery-4k-8bit-420-panasonic-gh4-converts-1080p-10bit-444/

Did anyone try that? Do color information really improve?

I am specially interested in the conversion to achieve the 4.4.4. as mentioned here: "Downscaling and transcoding to ProRes or CineForm at 1080p can convert the RGB 4K data from the GH4’s 4K 100Mbit/s codec to the higher bit depth of 10bit and colour sampling of 4:4:4."

There are various product types such as GoPro Studio (Premium, Professional, etc.) available. Which would I need and how would the workflow be with Premiere Pro CC 2015?

GH3/4 laggy 25p video

sergeiicz — Fri, 28 Aug 2015 15:27:09 +0000

Hello can somebody kick me in, i am lost now .. when i try to shot 25p 1/50 or 50p 1/100 video and import to Premiere with 25p sequence, video is laggy - no matter if i slow down 50p shot, even 25p is laggy - tripod pan, is there any settings in GH causing this ? try to switch off mega ois or set 180d shutter angle on gh4 i see that 25p video should be smooth in tripod pan (my 24p shot looks smoother) thanks for any ideas

Transition Designer Plugin for Mac

editor — Wed, 02 Sep 2015 04:28:26 +0000

I use this forum very often and you helped me a lot. Some of you guys asked me if there will be a Mac-Version of our plug-in and now, here it is.

The TRANSITION DESIGNER, the plug-in for professional transitions, is now a free-of-charge lean version in addition to the Full und Lite Version for Adobe Premiere Pro available with the following features for Mac and PC:

High-quality wipe effect with a lot of adjustable parameters such as angle, transition easing (linear, easy in & out), feathered edge, blur and glow effect. Many of the parameters support keyframes and we also included the powerful time remapping function. All transitions are GPU accelerated for real-time playback!

Get your free version here: bit.ly/accevolution

A7s mixed with RX100IV slog2 - a perfect combo?

elkanah77 — Fri, 14 Aug 2015 10:57:14 +0000

Shot and mixed A7s with RX100IV with PP slog2. Graded and edited in PP with pretty deep saturation. Think it works very well and this combo suits me way better than having just a A7rII which I considered for a brief moment.

Diagonal rain appears using GH2 + Premiere Pro CS6 without a hack

PeterParkorr — Mon, 11 Feb 2013 19:53:46 +0000

Hi,

I've been trying to work out why exporting some noisy low light footage in premiere pro CS6 is giving me 'diagonal rain' problems that aren't present in the original m2ts files from my GH2.

Reading two similar topics (below) the problem seems to be related to GOP length, which hack is being used, and the decoding abilities of certain players. But I shot this footage with the original firmware so this can't apply? Possibly it is a CS6 specific issue?

http://www.personal-view.com/talks/discussion/5120/please-help-problem-with-my-gh2-footage/p1 http://www.personal-view.com/talks/discussion/3804/strange-pulsing-diagonal-pattern-in-gh2-hack-footage/p1

It's not footage I can take again so any advice on how to export this without the noise would be amazing... I'm a beginner but not posted it there as the problem seems to be a complicated one.

I just uploaded the start of my edit to youtube for an example of the problem. Some of my footage was 24p and some was 50 fps 720p but the problem persists in all the export formats I've tried;

It Must Be the Weather - A short snowboard film

JulienMisc — Fri, 20 Mar 2015 04:25:17 +0000

Hi fox ! This is my last edit, a short film about freestyle snowboarding. A beautiful day in a marvelous park with the two killers Matteo Cuny and Nicolas Palladio. Top of the pop, we finished with a beautiful sunset. So glad and happy to have shot this.

Comments are welcome dudes! Some pics of the session can be found here : http://www.switchmag.fr/decouverte/2015/11391-session-park-a-la-clusaz-matteo-cuny-nico-palladio.html

Adobe premiere AUDIO DROP OUTS

tylerknight — Wed, 19 Mar 2014 21:00:01 +0000

I have searched far and wide to the far reaches of the internet and came up with nothing.

This has been a problem with adobe premiere as long as I can remember and still in the brand new CC version I am still getting audio drop outs randomly.

It is very random and can happen at any time the audio will drop out, then come back in and then go out again. If I stop playback and re-start, it will play for a little while and do it again.

I have tried changing every setting I possibly can within premiere and within my system and I am at a complete loss.

It is making it impossibly to do any editing

PLEASE HELP ME :(

Compression not supported and other weird problems with .MTS files

MetaControl — Sun, 16 Nov 2014 08:37:00 +0000

I am working on a project of mine, which was shot with a hacked GH2 and a hacked 5dmkii. I did much of the editing a while back, but then i had to change computer; including a transition from windows 7 to windows 8.1; i started editing the project in PP & AE CC back on my old machine and all was fine. but recently - it seems like it happened with the big 2014 update (as i am obviously not the only one who has issues) - i am having trouble with my .MTS files from the GH2. I use them outside the stream folder structure as individual files. and i had the weird bug, where i had to rename folders to make my files work in Premiere after the update (as they suggest as a workaround in the official forums). But now, i am having problems with the MTS files outside of premiere too. I wanted to make proxy files out of some of them, or check them out with gspot. something is wrong with the compression format, the codec or something. i tried re-installing quicktime (i think to recall that the mts is a mpeg2 wrapper) with no luck. does anybody have an idea what it might be?

Give Away: Free Plug-In for Adobe Premiere Pro: Accevolution Transition Designer Free

editor — Wed, 17 Dec 2014 06:46:54 +0000

I want to thank you for your support with special gift: a FREE version of the TRANSITION DESIGNER, our plug-in for Adobe Premiere Pro with the following features:

High-quality wipe effect with a lot of adjustable parameters such as angle, transition easing (linear, easy in & out), feathered edge, blur and glow effect.

Many of the parameters support keyframes and we also included the powerful time remapping function. All transitions are GPU accelerated for real-time playback!

Our Mac Version is coming in the first quarter of 2015.

Get your free version here (Windows only): http://shopen.accevolution.de/wid-59-Transition-Designer-Free.html

Have a great time, best regards, Wolfram

Summer Sun (5dmk3 Magic Lantern Raw + GH4)

elkanah77 — Fri, 07 Nov 2014 11:43:44 +0000

Tried to match up clips from both cameras. Very different ungraded, but looks pretty even after som post. More in the description.

Bifest 2015

sfavuzzi — Mon, 01 Dec 2014 04:10:19 +0000

BIF&ST – Bari International Film Festival reaches every year 70.000 spectators, and in just five editions, with its broad offer of the highest cultural level (our 2014 program presented 332 events over 8 days), it has grown to become one of the leading cinematic events in Italy. The 6th edition of Bif&st will be held March 21st to 28th, 2015.

http://www.bifest.it/en/

A travel video from Puglia, Italy, at a jazz festival and along the gorgeous Adriatic coastline.

PeterParkorr — Fri, 21 Nov 2014 05:26:45 +0000

I've been using my GH2 this summer for a european project with some other bloggers, tourist boards and Expedia.

This is the latest video, from a free Gregory Porter concert and some touring of the region. It's somewhere between a roadtrip film and a jazz festival report.

I wasn't really setup for capturing the concert in full, so some of my favourite shots came unexpectedly and weren't too steady. Time to invest in a steadicam obviously... but my editing has been getting better I think, so would be interested to hear what you think of the final product. I went quite heavy on the colouring at points to appeal to the instagram generation!

A train journey through India with my GH2 and no hack

PeterParkorr — Sat, 26 Apr 2014 21:34:22 +0000

A video made with footage shot in April 2013 on a luxury train tour through Maharashtra.

Took me forever to edit wading through hundreds of clips! Second time I have used Magic Bullet Looks and first time using Warp Stabilizer in Premiere Pro CS6, lots of the footage was shaky because it was mostly filmed on a moving train (and my camera movement was pretty terrible at times but this was definitely a run/sprint and gun scenario).

Pretty happy with the outcome altho the laptop I coloured the film on is quite yellow it seems. Still not using a hack...

Il motoscafo silenzioso (5d mk3 ML Raw)

elkanah77 — Mon, 27 Oct 2014 06:46:44 +0000

My first endeavour into raw with Magic Lantern on the 5d mk3. Must say I find the robustness of the raw files a joy to grade.